F065
Trast-thomhas Ainmeil na Pìoba a-muigh:
- Air a mholadh leis an Inbhe Iomairt airson Uidheam Criogenach HL. Faodar a dhèanamh cuideachd a rèir riatanasan an neach-ceannach.
- Brùthadh Dealbhaidh:
- Air a mholadh ≤ 16 bar. No tagh Seòrsa Ceangail Tàthaichte (≤40 bar).
- Stuth na Pìoba a-muigh
Às aonais riatanas sònraichte, thèid stuth a’ phìoba a-staigh agus a’ phìoba a-muigh a thaghadh san aon dòigh.
3.1.3 Seòrsa Ceangail Tàthaichte
modail
Ceangal
Seòrsa
Trast-thomhas Ainmeil na Pìoba a-staigh
Brùthadh Dealbhaidh
Stuth
den Phìob a-staigh
Coitcheann
Beachd
W010
00X
Seòrsa Ceangail Tàthaichte airson Pìob Sùbailte Inslithe Falamh Statach
DN10, 3/8"
8~40 bàr
Stàilinn gun staoin sreath 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Trast-thomhas Ainmeil na Pìoba a-muigh: | |
| Brùthadh Dealbhaidh | Stuth na Pìoba a-staigh. | Tha A 304, | DN40, 1-1/2" | Tha C 316, |
| Is e D 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Brùthadh Dealbhaidh |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Air a mholadh ≤ DN25 no 1". No a’ taghadh an Seòrsa Ceangail Bàinneid Falamh le Flanges agus Boltaichean (bho DN10, 3/8" gu DN80, 3"), Seòrsa Ceangail Tàthaichte (bho DN10, 3/8" gu DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Coitcheann | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Trast-thomhas Ainmeil na Pìoba a-muigh: |
| Air a mholadh leis an Inbhe Iomairt airson Uidheam Criogenach HL. Faodar a dhèanamh cuideachd a rèir riatanasan an neach-ceannach. | Stuth na Pìoba a-muigh | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Seòrsa | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Coitcheann | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Brùthadh Dealbhaidh. | / | DN25, 1" | DN25, 1" | / | |
| Stuth na Pìoba a-staigh. | / | DN25, 1" | DN25, 1" | / | |
| Tha C 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Trast-thomhas Ainmeil na Pìoba a-staigh:
| Air a mholadh ≤ DN25 no 1". No a’ taghadh an Seòrsa Ceangail Bàinneid Falamh le Flanges agus Boltaichean (bho DN10, 3/8" gu DN80, 3"), Seòrsa Ceangail Tàthaichte (bho DN10, 3/8" gu DN150, 6") | Trast-thomhas Ainmeil na Pìoba a-muigh: |
| Air a mholadh leis an Inbhe Iomairt airson Uidheam Criogenach HL. Faodar a dhèanamh cuideachd a rèir riatanasan an neach-ceannach. | Brùthadh Dealbhaidh: |
| Air a mholadh ≤ 16 bar. No tagh an Seòrsa Ceangail Tàthaichte (≤40 bar) | Stuth na Pìoba a-muighÀs aonais riatanas sònraichte, thèid stuth a’ phìoba a-staigh agus a’ phìoba a-muigh a thaghadh san aon dòigh.3.2 Siostam Pìobaireachd Inslithe Falamh Fiùghantach3/S |
| 3.2.1 Seòrsa Ceangail Baighneit Falmhachaidh le Teanntan | modail |
| Ceangal | Seòrsa |
| Trast-thomhas Ainmeil na Pìoba a-staigh | Brùthadh Dealbhaidh |
| Stuth | den Phìob a-staigh |
| Coitcheann | Beachd |
HDB01008
Seòrsa Ceangail Baighneit Falmhachaidh le Teanntan airson Pìob Sùbailte Inslithe Falmhachaidh Fiùghantach
lDN10, 3/8"
l8 bàr
| Stàilinn gun staoin sreath 300 Tha C 316, | Stuth na Pìoba a-staigh. | |
| Tha A 304, | Is e B 304L,Tha C 316,Is e D 316L, | |
| Is e E eile. | HLH | DB01508 |
| DN15, 1/2" | Brùthadh Dealbhaidh: | Brùthadh Dealbhaidh: |
| DN20, 3/4" | Brùthadh Dealbhaidh: | Brùthadh Dealbhaidh: |
| DN25, 1" | Brùthadh Dealbhaidh: | Brùthadh Dealbhaidh: |
| Trast-thomhas Ainmeil na Pìoba a-muigh: | Brùthadh Dealbhaidh: | Brùthadh Dealbhaidh: |
Air a mholadh ≤ 8 bar. No tagh an Seòrsa Ceangail Bàinneid Falamh le Flanges agus Boltaichean (≤16 bar), Seòrsa Ceangail Tàthaichte (≤40 bar)Stuth na Pìoba a-muighÀs aonais riatanas sònraichte, thèid stuth a’ phìoba a-staigh agus a’ phìoba a-muigh a thaghadh san aon dòigh.
Suidheachadh Cumhachd:
HL-HX-X-Feumaidh an làrach cumhachd a thoirt do na pumpaichean falamh agus fiosrachadh dealain ionadail (bholtaids agus hertz) a thoirt do HL Cryogenic Equipment.-00-X
3.2.2 Seòrsa Ceangail Baighneit Falmhachaidh le Flanges agus Boltaichean
modail
Ceangal
Seòrsa
Trast-thomhas Ainmeil na Pìoba a-staigh
Brùthadh Dealbhaidh
Stuth
den Phìob a-staigh
Coitcheann
Beachd
Nominal Diameter of Inner Pipe
00X
8~16 bàr
DN10, 3/8"
8~16 bàr
Stàilinn gun staoin sreath 300
Design Pressure
Brùthadh Dealbhaidh.
Tha 08 aig 8 bàr,
Tha 16 aig 16 bàr.
Stuth na Pìoba a-staigh.
Tha A 304,
Is e B 304L,
Tha C 316,
Is e D 316L,
Is e E eile.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Sreath dealachaidh ìre falamh inslithe | DN10, 3/8" | Armenianach
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrangachTrast-thomhas Ainmeil na Pìoba a-muigh:X | DN15, 1/2" | |||||
| FrangachAir a mholadh ≤ 16 bar. No tagh Seòrsa Ceangail Tàthaichte (≤40 bar).X | DN20, 3/4" | |||||
| FrangachSuidheachadh Cumhachd:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Innis Tìleach
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| FrangachTha 08 aig 8 bàr,00X | agus 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrangachSamòianach00X | DN15, 1/2" | |||||
| FrangachSindeach00X | DN20, 3/4" | |||||
| FrangachTajik00X | DN25, 1" | |||||
| FrangachThaidheach00X | DN32, 1-1/4" | |||||
| FrangachUsbagach00X | DN40, 1-1/2" | |||||
| FrangachZhosa00X | DN50, 2" | |||||
| FrangachZulu00X | DN65, 2-1/2" | |||||
| FrangachOriyach00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Suidheachadh Cumhachd:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Stàilinn gun staoin sreath 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrangachDN15, 1/2"00X | DN15, 1/2" | |||||
| FrangachDN20, 3/4"00X | DN20, 3/4" | |||||
| FrangachDN25, 1"00X | DN25, 1" | |||||
| FrangachW03200X | DN32, 1-1/4" | |||||
| FrangachW04000X | DN40, 1-1/2" | |||||
| FrangachW05000X | DN50, 2" | |||||
| FrangachW06500X | DN65, 2-1/2" | |||||
| FrangachW08000X | DN80, 3" | |||||
| HPìob Seacaid Falmhachaidh00X | DN100, 4" | |||||
| HBhalbha Riaghlaidh Sruth Ocsaidean Leachtach Sìona00X | DN125, 5" | |||||
| HTanca Inbhe ISO Sìona Prìs Slàn-reic 2 ...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSiostam Pumpa Falamh Fiùghantach00X | Sreath dealachaidh ìre falamh inslithe | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrangachWhatsapp00X | DN15, 1/2" | |||||
| FrangachWeChat00X | DN20, 3/4" | |||||
| FrangachGearmailteach00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Grèigeach
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Dànach
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenianach
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstòinianachX | DN15, 1/2" | |||||
| HLHFriseachX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Innis Tìleach
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalamach00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamòianach00X | DN15, 1/2" | |||||
| HLHDSindeach00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDThaidheach00X | DN32, 1-1/4" | |||||
| HLHDUsbagach00X | DN40, 1-1/2" | |||||
| HLHDZhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriyach00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
